Каталоги

TecDoc Engine Number: VOLVO DH12E460 ;
Fitting Position: Rear Axle ;
Br. Drum outer diameter [in]: 7 ;
Brake System: VAG ;
TecDoc Engine Number: VOLVO DH12E460 ;
Fitting Position: Rear Axle ;
Brake System: for vehicles with reinforced brakes ;
Brake System: for vehicles with brake-power regulator ;
Manufacturer Restriction: VAG ;
ArticleState: Normal

Fitting Position: Rear Axle ;
Length [mm]: 52 mm ;
Outer thread [mm]: M16 x 1,5 mm ;
Thread Length [mm]: 9 mm ;
Spanner Size: 27 ;
Number of connectors: 3 ;
Weight [kg]: 0.07 kg ;
Observe service information: ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.

Fitting Position: Rear Axle ;
Number of Poles: 2 pólos ;
Connector Shape: Oval ;
Sensor Type: Inductive Sensor ;
Resistance [Ohm]: 970 Ohm ;
Supplementary Article/Info 2: without cable ;
Fitting Depth [mm]: 34.5 mm ;
ArticleState: Normal

Fitting Position: Rear Axle ;
Brake System: VAG ;
for article number: LS1277 ;
Warranty: 5 Years Warranty ;
ArticleState: Normal

Number of Poles: 2 pólos ;
Connector Shape: Oval ;
Sensor Type: Inductive Sensor ;
Resistance [Ohm]: 970 Ohm ;
Supplementary Article/Info 2: without cable ;
Fitting Depth [mm]: 34.5 mm ;
ArticleState: Normal

Fitting Position: Rear Axle ;
Brake System: VAG ;
Number of Poles: 2 pólos ;
Connector Shape: Oval ;
Sensor Type: Inductive Sensor ;
Resistance [Ohm]: 970 Ohm ;
Supplementary Article/Info 2: without cable ;
Fitting Depth [mm]: 34.5 mm ;
ArticleState: Normal

Length [mm]: 38.25 mm ;
Width [mm]: 67 mm ;
Height [mm]: 34 mm ;
Weight [kg]: 0.046 kg ;
Required quantity: 1 ;
Resistance [Ohm]: 920 Ohm ;
Colour: Black ;
Operating Mode: Electric ;
Sensor Type: Passive sensor ;
Sensor Type: Inductive Sensor ;
Number of Poles: 2 pólos ;
Number of connectors: 2 ;
Rated Voltage [V]: 12 V ;
Fitting Depth [mm]: 34.5 mm ;
Supplementary Article/Info 2: for crankshaft ;
Supplementary Article/Info 2: with seal ;
Supplementary Article/Info 2: without cable ;
Connector Shape: Oval ;
Number of mounting bores: 1 ;
ArticleState: Normal ;
Brief Information: Einbausicherheit durch fahrzeugspezifisch codierte Stecker ;
Brief Information: hohe Passgenauigkeit des Sensorkopfes für garantiert korrekte Positionserkennung des Schwungrads ;
Brief Information: Einsatz von Dauermagneten im Sensorkopf zum Erhalt des statischen Magnetfeldes ("long life")